8 September 2010 Strain measurements of a fiber loop rosette using high spatial resolution Rayleigh scatter distributed sensing
Author Affiliations +
Proceedings Volume 7653, Fourth European Workshop on Optical Fibre Sensors; 765333 (2010) https://doi.org/10.1117/12.866536
Event: (EWOFS'10) Fourth European Workshop on Optical Fibre Sensors, 2010, Porto, Portugal
Abstract
Strain is measured with high spatial resolution on fiber loops bonded to a metal test sample to form a fiber rosette. Strain measurements are made using an Optical Backscatter Reflectometer to detect changes in the phase of the Rayleigh Scatter of the fiber with 160 μm spatial resolution along the length of the fiber. Using this experimental set-up, applied strain levels as well as the axis along which the loads are applied are measured. Thermal gradients are also detected. The high spatial resolution and strain sensitivity of this technique enable highly functional fiber rosettes formed of small diameter loops of standard low-bend-loss optical fiber.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dawn K. Gifford, Dawn K. Gifford, Alex K. Sang, Alex K. Sang, Steven T. Kreger, Steven T. Kreger, Mark E. Froggatt, Mark E. Froggatt, } "Strain measurements of a fiber loop rosette using high spatial resolution Rayleigh scatter distributed sensing", Proc. SPIE 7653, Fourth European Workshop on Optical Fibre Sensors, 765333 (8 September 2010); doi: 10.1117/12.866536; https://doi.org/10.1117/12.866536
PROCEEDINGS
4 PAGES


SHARE
Back to Top