6 October 2010 Study on optical design method for LED extended sources
Author Affiliations +
Proceedings Volume 7655, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 765536 (2010) https://doi.org/10.1117/12.866847
Event: 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies, 2010, Dalian, China
Abstract
Conventional LED optical design method that is commom for the point source approximation based on energy conservation and the law of refraction and reflection, and the final optical model solved by stepping method. The method that plays an important role in the LED second optical design is not applicable to the LED extended sources. In this paper, the optical design method is present for LED extended sources by using edge ray theorem, and light intensity optical model has be established by this method. The optical simulation results of uniform light intensity curve of the model are compared with the models designed by approximate design method of point source. The results show that the directions of outgoing light lines can be controlled more accurately by edge ray theorem and have better uniformity. The method can be applied for the LED encapsulation optical system design and multi-chip source optical design of high-power LED. It can improve the design accuracy and save design cost.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hong Wang, Hong Wang, Haihong Wang, Haihong Wang, Naifeng Du, Naifeng Du, Xiaofan Zhang, Xiaofan Zhang, } "Study on optical design method for LED extended sources", Proc. SPIE 7655, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 765536 (6 October 2010); doi: 10.1117/12.866847; https://doi.org/10.1117/12.866847
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Design of collimating system for LED source
Proceedings of SPIE (December 30 2013)
Design and evaluation of a freeform lens by using a...
Proceedings of SPIE (February 19 2017)
Free-form lens design for LED indoor illumination
Proceedings of SPIE (November 15 2010)

Back to Top