22 October 2010 A novel chemically selective siloxane polymer for chemical vapor sensing
Author Affiliations +
Abstract
A new hydrogen-bond acidic carbosiloxane polymer for quartz crystal microbalance sensors (QCMs) application was synthesized via O-alkylation, Claisen rearrange, hydrosilylation reaction and functionalized the polysiloxane with trifluoroacetone groups (TFA). The trifluoroisopropanol functionalized polysiloxane was characterized by FT-IR and 1HNMR. And this novel siloxane polymer was coated onto AT-cut 8 MHz QCM sensors to investigate its gas sensitive responses to the organophosphorus nerve agent stimulant dimethyl methylphosphonate (DMMP) vapor as well as other interfering organic vapors. The research work indicated that frequency shifts of the trifluoroisopropanol functionalized polysiloxane based QCM sensor to the DMMP vapor were completely linear, and with a regression coefficient of 0.9973 in the concentration range of 10-60 ppm. In addition, the sensitivity of the fabricated QCM sensors to DMMP was up to 10.64 Hz/ ppm, and much higher than the other interfering vapors, limits of detection (LODs) of the QCM sensors was 0.28 ppm, thus high selectivity to DMMP was demonstrated in this work.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jia Huang, Jia Huang, Yadong Jiang, Yadong Jiang, Xiaosong Du, Xiaosong Du, Juan Bi, Juan Bi, } "A novel chemically selective siloxane polymer for chemical vapor sensing", Proc. SPIE 7658, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optoelectronic Materials and Devices for Detector, Imager, Display, and Energy Conversion Technology, 76580W (22 October 2010); doi: 10.1117/12.865523; https://doi.org/10.1117/12.865523
PROCEEDINGS
7 PAGES


SHARE
Back to Top