Paper
22 October 2010 Design of the acquisition system with low-noise based on 160×120 uncooled infrared detector
Yanmin Xing, Yun Zhou
Author Affiliations +
Abstract
This paper discusses the importance of the Uncooled infrared focal plane array detector with low noise, and focuses on solving the hardware problem - how to reduce the noise of the detector by the technique of I2C and differential input. Meanwhile the hardware circuitry should meet the driving conditions. Beside of this, the author aims to describe the method using in reducing the noise of the detector driver circuit, the quantization noise of the A/D circuit, removing the image background noise, non-uniformity correction and so on. Moreover, the author analyzes the noisy level of each part of the circuitry in theory, and obtains the RMS and SNR of the practical image. The results show that: the acquisition system is working properly and has a comparably low noise performance. The RMS noise of the acquisition system is 568 μV, and the SNR reaches over 60 dB under the blackbody irradiation and the room temperature.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yanmin Xing and Yun Zhou "Design of the acquisition system with low-noise based on 160×120 uncooled infrared detector", Proc. SPIE 7658, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optoelectronic Materials and Devices for Detector, Imager, Display, and Energy Conversion Technology, 76584N (22 October 2010); https://doi.org/10.1117/12.865807
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal to noise ratio

Sensors

Interference (communication)

Infrared detectors

Analog electronics

Clocks

Signal detection

Back to Top