Finite element analysis and neural network model for electronic hidden solder joint geometry prediction

Jose Benjamin Dolores Giron Palomares; Sheng-Jen Hsieh

doi:10.1117/12.849935

3 May 2010 Finite element analysis and neural network model for electronic hidden solder joint geometry prediction

Jose Benjamin Dolores Giron Palomares, Sheng-Jen Hsieh

Proceedings Volume 7661, Thermosense XXXII; 76610T (2010) https://doi.org/10.1117/12.849935
Event: SPIE Defense, Security, and Sensing, 2010, Orlando, Florida, United States

Abstract

This paper investigates an active thermography approach to probing hidden solder joint geometry. Ten boards were fabricated with the same number of solder joints and amount of solder paste (0.061 g), but using three solder joint geometries (60°, 90°, and 120°). The 90° angle solder pin represented a normal joint, and the 60° and 120° angle pins represented abnormal solder joints. Each board was covered with another board that had three openings just big enough to allow the pin terminals to protrude. A semi-automated system was built to heat and then transfer each board set to a chamber where an infrared camera was used to scan the board as it was cooling down. Each board set underwent the heating, cooling, and scanning process for five trials. Two-thirds of the data set was used for model development and one-third for model evaluation. An artificial neural network (ANN) was constructed to predict abnormal joints given thermal data. Results suggest that solder joints with more surface area cool much faster than those with less surface area. A Finite Element Analysis (FEA) of the heating up and cooling down process consistently predicted solder geometry using the ANN with 86% accuracy. This approach can be used not only to inspect bad solder joints (i.e., low reliability) but also to mass screen for cold solder joints during BGA assembly, since the air gaps in cold solder joints may cause them to cool more slowly than normal joints.

Citation Download Citation

Jose Benjamin Dolores Giron Palomares and Sheng-Jen Hsieh "Finite element analysis and neural network model for electronic hidden solder joint geometry prediction", Proc. SPIE 7661, Thermosense XXXII, 76610T (3 May 2010); https://doi.org/10.1117/12.849935

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
13 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Thermography

Finite element methods

3D modeling

Thermal modeling

Data modeling

Infrared imaging

Infrared cameras

Show All Keywords

Keywords/Phrases

Search In:

Publication Years