28 April 2010 An investigation of real-time high-speed multichannel fiber Bragg grating monitoring system
Author Affiliations +
Abstract
The article was based on the technology and principle of DWDM, which was widely used in optical fiber communication systems, and made use of filter curve and technology of WDM into multichannel dynamic measurements. The technology of the investigation was based on the passive demodulation technologies. The samling rate of the real-time high-speed mutilchannel fiber Bragg grating monitoring system can reach 200KHz, which can both meet the needs of static and dynamic measurement and achieve the monitoring in dynamic environment. In order to adapt the requirement of static and dynamic measurement, increasing the sampling and transmission speed of the fiber grating demodulation is needed. In this article, the wavelength demodulation range of the system is about 0.7 nm, the precision can be 10~17 pm, and transmission interface is based on the USB 2.0, which speed is fast enough for the use of our monitoring system.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tiegen Liu, Tiegen Liu, Tielong Xu, Tielong Xu, Lei Li, Lei Li, Junfeng Jiang, Junfeng Jiang, Kun Liu, Kun Liu, Jin Han, Jin Han, Meng He, Meng He, } "An investigation of real-time high-speed multichannel fiber Bragg grating monitoring system", Proc. SPIE 7682, Photonic Microdevices/Microstructures for Sensing II, 76820W (28 April 2010); doi: 10.1117/12.850015; https://doi.org/10.1117/12.850015
PROCEEDINGS
11 PAGES


SHARE
Back to Top