13 May 2010 Smart technology for blazed multilevel gratings in resonance domain
Author Affiliations +
Abstract
The design and the fabrication of a multilevel blazed grating in resonance domain for first order high efficiency applications are presented. The design shows that a 3 phase level grating is sufficient to achieve efficiency of 90% in the minus first diffraction order. The standard technology for the fabrication of multilevel grating consists in multistep electron beam lithography and reactive ion beam etching of the grating profile into the fused silica substrate. Typical fabrication errors of this technology approach, e.g. misalignment, reduce the theoretical reachable efficiency of the grating. Two new technological approaches were investigated to avoid these typical fabrication errors and to improve the multi level fabrication process. The designed grating has been fabricated by three different technological solutions and the geometrical characterization as well as the diffraction performance are presented and discussed.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Oliva, T. Benkenstein, J. Dunkel, T. Harzendorf, A. Matthes, D. Michaelis, U. D. Zeitner, "Smart technology for blazed multilevel gratings in resonance domain", Proc. SPIE 7716, Micro-Optics 2010, 77161L (13 May 2010); doi: 10.1117/12.854587; https://doi.org/10.1117/12.854587
PROCEEDINGS
10 PAGES


SHARE
Back to Top