Paper
14 May 2010 Sensitivity enhancement of bimaterial MOEMS thermal imaging sensor array using 2-λ wavelength readout
Author Affiliations +
Abstract
Diffraction gratings integrated with MEMS sensors offer sensitive displacement measurements. However, the sensitivity of the interferometric readout may drop significantly based on the sensor position. A two wavelength readout method was developed and tested previously in order to maintain the sensitivity of the readout > %50 maximum sensitivity over a broad range (i.e. several um's for visible wavelengths). This work demonstrates the sensitivity enhancement of a MEMS thermal imaging sensor array. Measurement of the target scene was performed using two lasers at different wavelengths (633, 650 nm). The diffracted 1st order light from the array was imaged onto a single CCD camera for both sources. The target scene was reconstructed by observing the change in the 1st diffracted order diffraction intensity for both wavelengths. Merging of the data, acquired with two different sources, is performed by assigning each pixel in the final image with the higher sensitivity pixel among two measurements. > 30% increase in the average sensitivity was demonstrated for the sensor array.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
O. Ferhanoĝlu and H. Urey "Sensitivity enhancement of bimaterial MOEMS thermal imaging sensor array using 2-λ wavelength readout", Proc. SPIE 7718, Optical Micro- and Nanometrology III, 77180O (14 May 2010); https://doi.org/10.1117/12.854753
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Thermography

Image sensors

Imaging arrays

Infrared imaging

CCD image sensors

Charge-coupled devices

RELATED CONTENT


Back to Top