14 May 2010 Advances in the development of the LNE metrological atomic force microscope
Author Affiliations +
Abstract
SPM users need to calibrate their instrument periodically in order to provide some traceable measurements and to improve their measurements capabilities. This calibration task is achieved thanks to standards - 1D or 2D gratings - whose dimensional characteristics have been characterized by a National Metrology Institute. Within this context, LNE is developing a home made metrological Atomic Force Microscope (mAFM) with direct traceable measurement capabilities. This mAFM will be able to calibrate those standards. The measurement volume is about 60 μm for X and Y axis and about 10 μm for Z axis. The expected uncertainty for the tip-sample relative position measurement is in the order of 1 nm. This paper focus on the specific development that have been achieved: a three axis flexure stage with very high guidance capability, an optimized metrology loop and a specific design with four differential dual-pass interferometer that provide an Abbe error below 1nm for the whole measuring volume.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Benoit Poyet, Sébastien Ducourtieux, "Advances in the development of the LNE metrological atomic force microscope", Proc. SPIE 7718, Optical Micro- and Nanometrology III, 77180U (14 May 2010); doi: 10.1117/12.854201; https://doi.org/10.1117/12.854201
PROCEEDINGS
8 PAGES


SHARE
Back to Top