You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
27 April 2010A 25-GHz TO-Can header for coaxial laser package on transmission applications
A new 5-pin transistor outline (TO-Can) header for conventional coaxial laser package has been proposed and
demonstrated by using a three-dimensional full-wave electromagnetic simulation tool. The applicability of the simulation
tool was verified by a measurement result of a conventional TO-56 header. By adopting a two-session feed-through via
and a bent feed-lead, this TO-Can header has the optimal impedance for high-speed modulation. The reflection loss can
be controlled beneath -10-dB before 15-GHz with a 50-Ω termination. The 3-dB modulated bandwidth with a load
impedance of 5-Ω and 50-Ω is over 23-GHz and 37-GHz, respectively. This TO-Can header provides a low-cost coaxial
laser package solution with widely load impedances from 5-Ω to 50-Ω and may apply in the emerging 100-Gigabits
Ethernet (100GbE) and next generation Fiber Channel (20GFC) applications.
The alert did not successfully save. Please try again later.
Tien-Tsorng Shih, Pei-Hao Tseng, Hao-Wei Chen, Sung-Mao Wu, Wood-Hi Cheng, "A 25-GHz TO-Can header for coaxial laser package on transmission applications," Proc. SPIE 7720, Semiconductor Lasers and Laser Dynamics IV, 77201P (27 April 2010); https://doi.org/10.1117/12.853687