10 August 2010 Shape correction of thin mirrors in a recongurable modular space telescope
Author Affiliations +
In order to facilitate the construction of future large space telescopes, the development of low cost, low mass mirrors is necessary. However, such mirrors suffer from a lack of structural stability, stiffness, and shape accuracy. Active materials and actuators can be used to alleviate this deficiency. For observations in the visible wavelengths, the mirror surface must be controlled to an accuracy on the order of tens of nanometers. This paper presents an exploration of several mirror design concepts and compares their effectiveness at providing accurate shape control. The comparison test is the adjustment of a generic mirror from its manufactured spherical shape to the shape required by various off-axis mirrors in a segmented primary mirror array. A study of thermal effects is also presented and, from these results, a recommended design is chosen.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Keith Patterson, Keith Patterson, Sergio Pellegrino, Sergio Pellegrino, James Breckinridge, James Breckinridge, } "Shape correction of thin mirrors in a recongurable modular space telescope", Proc. SPIE 7731, Space Telescopes and Instrumentation 2010: Optical, Infrared, and Millimeter Wave, 773121 (10 August 2010); doi: 10.1117/12.861442; https://doi.org/10.1117/12.861442


Smart co-phasing system for segmented mirror telescopes
Proceedings of SPIE (July 26 2016)
Lessons not to make light of (when designing optical systems...
Proceedings of SPIE (September 08 2015)
Synthetic aperture adaptive optics concept
Proceedings of SPIE (May 30 1994)
Lightweight off axis 8 m class telescope a case...
Proceedings of SPIE (July 06 2004)
GISOT: a giant solar telescope
Proceedings of SPIE (September 27 2004)

Back to Top