Paper
10 August 2010 Monte Carlo simulations as a tool for radiation damage evaluation
Author Affiliations +
Abstract
One critical aspect in designing a space mission is the assessment of the level of radiation damage to the equipment that one can expect during the course of the mission. The radiation environment in L2 orbit, however, has not been studied as extensively as in the Low Earth Orbit case. Fluka is a Montecarlo software developed by CERN and INFN and extensively used in high energy experimental physics and engineering, shielding, detector and telescope design, and cosmic ray studies. In this paper, we make use of FLUKA to model the geometry of the structures surrounding the detector, in order to analyze the mitigation strategy (i.e.: shielding of the detector assembly) in a well defined case (the Euclid-NIS instrument, which is in its early design phase). By using a realistic cosmic ray spectrum and composition, we analyze the resulting dose of ionizing and non-ionizing radiation on the Euclid-NIS detectors, and other effects.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sebastiano Ligori, Alberto Riva, Marco Mauri, Leonardo Corcione, Favio Bortoletto, Carlotta Bonoli, and Enrico Giro "Monte Carlo simulations as a tool for radiation damage evaluation", Proc. SPIE 7731, Space Telescopes and Instrumentation 2010: Optical, Infrared, and Millimeter Wave, 77313F (10 August 2010); https://doi.org/10.1117/12.856996
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Particles

Monte Carlo methods

Space operations

Silicon

Radiation effects

Silicon carbide

RELATED CONTENT

Space debris: modeling and detectability
Proceedings of SPIE (January 13 2017)
New Horizons Pluto lessons learned during ground processing
Proceedings of SPIE (September 07 2006)
Effects of radiation on MEMS
Proceedings of SPIE (February 18 2011)

Back to Top