Paper
29 July 2010 The thermal analysis of the Hard X-ray Telescope (HXT) and the investigation of the deformation of the mirror foil due to temperature change
Keitaro Ito, Keiji Ogi, Hisamitsu Awaki, Tatsuro Kosaka, Yasufumi Yamamoto
Author Affiliations +
Abstract
The thin film technology called "depth-graded multi-layer" is used to manufacture reflector foils, which are inserted in a hard X-ray telescope. When the temperature of the foil changes from the temperature at which the foil was produced; thermal deformation is induced due to difference of linear coefficient of expansion of its constituents. The deformation causes performance of X-ray image formation to deteriorate. Therefore, it is absolutely imperative to estimate the amount of deformation quantitatively and to establish a method of temperature control for the foil under the thermal environment on orbit. We used the hard X-ray telescope, which is part of the currently-projected the ASTRO-H X-ray satellite, as an example for investigation. The effective method of the HXT thermal control was examined with the thermal analytical software, "Thermal Desktop". The deformation of the foil when the temperature was changed by 1 degree C was predicted by a finite element analysis (FEA). The thermal desktop analysis shows that the overall foil temperature in orbit can be close to the temperature at which the foils were produced (~22degree C) by the newly developed thermal control method. The FEM analysis shows that the prediction of the foil deformation due to a temperature change of 1 degree C is about 8 μm.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Keitaro Ito, Keiji Ogi, Hisamitsu Awaki, Tatsuro Kosaka, and Yasufumi Yamamoto "The thermal analysis of the Hard X-ray Telescope (HXT) and the investigation of the deformation of the mirror foil due to temperature change", Proc. SPIE 7732, Space Telescopes and Instrumentation 2010: Ultraviolet to Gamma Ray, 77323A (29 July 2010); https://doi.org/10.1117/12.856581
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Temperature metrology

Finite element methods

Satellites

3D modeling

X-ray telescopes

Hard x-rays

Sensors

RELATED CONTENT

DIOS: the dark baryon exploring mission
Proceedings of SPIE (July 25 2014)
The development of the µROSI x-ray telescope
Proceedings of SPIE (September 26 2013)
New x-ray telescope mission (NeXT)
Proceedings of SPIE (January 29 2004)
FFAST mission to study the evolution of the universe in...
Proceedings of SPIE (September 17 2012)
Astro E2 mission the third X ray observatory in...
Proceedings of SPIE (March 11 2003)

Back to Top