29 July 2010 Enhancing the International X-ray Observatory
Author Affiliations +
Over the last two years, we have studied system concepts for the International X-ray Observatory (IXO) with the goal of increasing the science return of the mission and to reduce technical and cost risk. We have developed an optical bench concept that has the potential to increase the focal length from 20 to 25 m within the current mass and stability requirements. Our deployable bench is a tensegrity structure formed by two telescoping booms (compression) and a hexapod cable (tension) truss. This arrangement achieves the required stiffness for the optical bench at minimal mass while employing only high TRL components and flight proven elements. The concept is based on existing elements, can be fully tested on the ground and does not require new technology. Our design further features hinged, articulating solar panels, an optical bench fully enclosed in MLI and an instrument module with radially facing radiator panels. We find that our design can be used over a wide range of sun angles, thereby greatly increasing IXO's field of regard, without distorting the optical bench. This makes a much larger fraction of the sky instantaneously accessible to IXO.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rolf Danner, Rolf Danner, Dean Dailey, Dean Dailey, Charles Lillie, Charles Lillie, Connie Spittler, Connie Spittler, } "Enhancing the International X-ray Observatory", Proc. SPIE 7732, Space Telescopes and Instrumentation 2010: Ultraviolet to Gamma Ray, 77323V (29 July 2010); doi: 10.1117/12.855968; https://doi.org/10.1117/12.855968


GOES solar x-ray imager: overview and operational goals
Proceedings of SPIE (October 17 1996)
XEUS mission reference design
Proceedings of SPIE (October 10 2004)
The status of the XEUS x-ray observatory mission
Proceedings of SPIE (August 17 2005)
X-Ray Telescopes
Proceedings of SPIE (August 31 1974)

Back to Top