Paper
11 August 2010 Design and construction of the Discovery Channel Telescope enclosure
Author Affiliations +
Abstract
The Discovery Channel Telescope (DCT) is a project of Lowell Observatory, undertaken with support from Discovery Communications, Inc., to design and construct a 4-meter class telescope and support facility on a site approximately 40 miles southeast of Flagstaff, Arizona. The Discovery Channel Telescope Enclosure was completed in November, 2009. The DCT Enclosure is an octagonal steel structure with insulated composite panel skin. The structure rotates on sixteen compliant bogie assemblies attached to the stationary facility. The shutter is composed of two independently actuated, bi-parting structures that provide a viewing aperture. To improve seeing, the skin is covered with adhesive aluminum foil tape and the enclosed observing area is passively ventilated via rollup doors. The observing area can also be actively ventilated using a downdraft fan, and there are provisions for upgrades to active air conditioning. The enclosure also includes operational equipment such as a bridge crane, personnel lift, and access platforms. This paper discusses some of the design trades as well as the construction challenges and lessons learned by the DCT Project, its designer M3 Engineering and Technology Corporation (M3), and its general contractor, Building and Engineering Contractors, Southwest (BEC Southwest).
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Heather K. Marshall, Jose U. Teran, and Kevin Bond "Design and construction of the Discovery Channel Telescope enclosure", Proc. SPIE 7733, Ground-based and Airborne Telescopes III, 77335C (11 August 2010); https://doi.org/10.1117/12.856465
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Camera shutters

Telescopes

Bridges

Control systems

Domes

Optical instrument design

Aluminum

RELATED CONTENT

MROI unit telescope enclosure manufacturing and tests
Proceedings of SPIE (July 06 2018)
Next generation telescope enclosure a 91 m (300 ft.)...
Proceedings of SPIE (August 02 2000)
Design of the Discovery Channel Telescope enclosure
Proceedings of SPIE (September 28 2004)
Mechanical concepts for 30-m class telescopes
Proceedings of SPIE (January 30 2003)
Unique dome design for the SOAR telescope project
Proceedings of SPIE (August 02 2000)

Back to Top