19 July 2010 Investigation of sub-aperture polish techniques for manufacturing astronomical mirror
Author Affiliations +
Nanjing Institute of Astronomical Optics & Technology (NIAOT) is investigating two types of sub-aperture polish technique for manufacturing aspheric components in large astronomical telescopes. One technique is computer controlled optical surfacing (CCOS). It removes material by a small polish tool through traditional mechanical and chemical process. The other is ion beam figuring (IBF) technique. It employs a neutralized ion beam to physically sputter material form optical surface. Although the basic mechanism of the two techniques is different, they true share the same mathematical model and fabrication diagram which will be put forward firstly in this paper. Then tool design and material removal function in CCOS will be studied following by a fabrication instance using CCOS. After that some recent progresses achieved in IBF is presented. The last part will focus on the complementary relationship of CCOS and IBF. Using them alternatively optimal combination of surface precision, efficiency and edge control could be obtained. Simulation is provided to support this view and experiment will be done in near future.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yi Zheng, Yi Zheng, Xin-nan Li, Xin-nan Li, Wei-yuan Guo, Wei-yuan Guo, Zhi-chuan Dong, Zhi-chuan Dong, Bin Liang, Bin Liang, Zi-bo Jiang, Zi-bo Jiang, } "Investigation of sub-aperture polish techniques for manufacturing astronomical mirror", Proc. SPIE 7739, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation, 77390E (19 July 2010); doi: 10.1117/12.856789; https://doi.org/10.1117/12.856789


Yet one more dwell time algorithm
Proceedings of SPIE (June 15 2017)
Design and manufacturing of a compact two mirror system for...
Proceedings of SPIE (September 25 2017)
Freeform design and fabrication Where the proof of the...
Proceedings of SPIE (January 05 2018)
Prototype segments polishing and testing for ELT M1
Proceedings of SPIE (September 13 2012)
Optical wavelength image slicer
Proceedings of SPIE (September 30 2004)

Back to Top