19 July 2010 Manufacturing of the ZERODUR 1.5-m primary mirror for the solar telescope GREGOR as preparation of light weighting of blanks up to 4-m diameter
Author Affiliations +
Abstract
The 1.5 m primary ZERODUR® mirror of the solar telescope GREGOR incorporates 420 pockets at the backside for active cooling to avoid the thermal load impact of the sun deteriorating the observation. This design is also under consideration for the 2 m Indian Solar Telescope and for the 4.2 m European Solar Telescope (EST). The tip and tilt M5 mirror of the European Extremely Large Telescope (E-ELT) requires an even more demanding approach in light weighting. The approximately 3 m × 2.4 m elliptical flat mirror is specified to a weight of less than 500 kg. During the successful manufacturing of the GREGOR light weighted mirror, SCHOTT developed a systematic approach for processing such complex and long lead items which are capable for being up-scaled to a dimension of 4 m. In parallel SCHOTT has tested the machining of challenging aspect ratios of rib thickness and pocket height to prove the machinability of the E-ELT M5 design suggestions. The improved data on the bending strengths of ZERODUR® enable aggressive designs for light weighted 4 m class mirrors.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thomas Westerhoff, Thomas Westerhoff, Martin Schäfer, Martin Schäfer, Armin Thomas, Armin Thomas, Marco Weissenburger, Marco Weissenburger, Thomas Werner, Thomas Werner, Alexander Werz, Alexander Werz, } "Manufacturing of the ZERODUR 1.5-m primary mirror for the solar telescope GREGOR as preparation of light weighting of blanks up to 4-m diameter", Proc. SPIE 7739, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation, 77390M (19 July 2010); doi: 10.1117/12.856360; https://doi.org/10.1117/12.856360
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT


Back to Top