Translator Disclaimer
22 July 2010 Performance of the VST secondary mirror support system
Author Affiliations +
The VST telescope is equipped with an active optics system based on a wavefront sensor, a set of axial actuators to change the primary mirror shape and a secondary mirror positioner stage. The secondary mirror positioning capability allows the correction of defocus and coma, caused by incorrect relative positions of the two mirrors arising from the deformation of the telescope tube and of the optical train under the effect of gravity and thermal espansion. Periodically the image analyser calculates the deviation of the image from the best quality and the telescope control software decomposes the deviation into the single optical contributions. The new position and orientation of the secondary mirror is computed by the telescope control software and transmitted to the secondary mirror support system for execution. The secondary mirror positioner is a hexapod, i.e. a parallel robot with a mobile platform moved by six linear actuators acting simultaneously. This paper describes the secondary mirror support system and the qualification test campaign performed both in laboratory and at the telescope.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pietro Schipani, Sergio D'Orsi, Davide Fierro, Laurent Marty, Francesco Perrotta, and Carmelo Arcidiacono "Performance of the VST secondary mirror support system", Proc. SPIE 7739, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation, 773932 (22 July 2010);


Improving the Blanco Telescope's delivered image quality
Proceedings of SPIE (August 05 2010)
The active optics system of the VST concepts and...
Proceedings of SPIE (September 17 2012)
The VST secondary mirror support system
Proceedings of SPIE (July 23 2008)
Performance of the active M1 cell for the 2.1 m...
Proceedings of SPIE (August 25 1998)

Back to Top