Paper
23 July 2010 Toward high-dynamic active mirrors for LGS refocusing systems
Author Affiliations +
Abstract
In the frame of the E-ELT-EAGLE instrument phase A studies, we designed a convex VCM able to compensate for the focus variation on the Laser Guide Star (LGS) wavefront sensor, due to the elevation of the telescope and the fixed sodium layer altitude. We present an original optical design including this active convex mirror, providing a large sag variation on a spherical surface with a 120mm clear aperture, with an optical quality better than lambda/5 RMS up to 820μm of sag and better than lambda/4 RMS up to 1000μm of sag. Finite element analysis (FEA) allowed an optimisation of the mirror's variable thickness distribution to compensate for geometrical and material non linearity. Preliminary study of the pre-stressing has also been performed by FEA, showing that a permanent deformation remains after removal of the loads. Results and comparison with the FEA are presented in the article of F.Madec et al (AS10-7736-119, this conference), with an emphasis on the system approach.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Emmanuel Hugot, Fabrice Madec, Sébastien Vives, Marc Ferrari, David Le Mignant, and Jean Gabriel Cuby "Toward high-dynamic active mirrors for LGS refocusing systems", Proc. SPIE 7739, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation, 773939 (23 July 2010); https://doi.org/10.1117/12.855992
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Finite element methods

Telescopes

Spherical lenses

Sodium

Space telescopes

Active optics

Back to Top