7 June 2010 Photomask defect detection and inspection: aerial imaging and high resolution inspection strategies
Author Affiliations +
Proceedings Volume 7748, Photomask and Next-Generation Lithography Mask Technology XVII; 774827 (2010) https://doi.org/10.1117/12.869574
Event: Photomask and NGL Mask Technology XVII, 2010, Yokohama, Japan
Abstract
Advanced photomasks exploit complex patterns that show little resemblance to the target printed wafer pattern. The main mask pattern is modified by various OPC and SRAF features while further complexity is introduced as source-mask-optimization (SMO) technologies experience early adoption at leading manufacturers. The small size and irregularity of these features challenge the mask inspection process as well as the mask manufacturing process. The two major concerns for mask inspection and qualification efficacy of advanced masks are defect detection and photomask inspectability. Enhanced defect detection is critical for the overall mask manufacturing process qualification which entails characterization of the systematic deviations of the pattern. High resolution optical conditions are the optimal solution for manufacturing process qualification as well as a source of additional information for the mask qualification. Mask inspection using high resolution conditions operates on an optical image that differs from the aerial image. The high resolution image closely represents the mask plane pattern. Aerial imaging mode inspection conditions, where the optics of the inspection tool emulates the lithography manufacturing conditions in a scanner, are the most compatible imaging solution for photomask pattern development and hence mask inspectability. This is an optimal environment for performing mask printability characterization and qualification. In this paper we will compare the roles of aerial imaging and high resolution mask inspection in the mask house.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sunghyun Oh, Sunghyun Oh, DaeHo Hwang, DaeHo Hwang, Inpyo Kim, Inpyo Kim, Changreol Kim, Changreol Kim, Aviram Tam, Aviram Tam, Michael Ben Yishai, Michael Ben Yishai, Yulian Wolff, Yulian Wolff, } "Photomask defect detection and inspection: aerial imaging and high resolution inspection strategies", Proc. SPIE 7748, Photomask and Next-Generation Lithography Mask Technology XVII, 774827 (7 June 2010); doi: 10.1117/12.869574; https://doi.org/10.1117/12.869574
PROCEEDINGS
13 PAGES


SHARE
Back to Top