22 September 2010 Two-dimensional modeling of the back amorphous-crystalline silicon heterojunction (BACH) photovoltaic device
Author Affiliations +
Proceedings Volume 7750, Photonics North 2010; 77502V (2010) https://doi.org/10.1117/12.872942
Event: Photonics North 2010, 2010, Niagara Falls, Canada
Back Amorphous-Crystalline Silicon Heterojunction (BACH)1 solar cell can be fabricated using low temperature processes while integrating high efficiency features of heterojunction silicon solar cells and back-contact homojunction solar cells. This article presents a two-dimensional modeling study of the BACH cell concept. A parametric study of the BACH cell has been carried out using Sentaurus after benchmarking the software. A detailed model describing the optical generation is defined. Solar cell efficiency of 24.4% is obtained for AM 1.5 global spectrum with VOC of greater than 720 mV and JSC exceeding 40 mA/cm2, considering realistic surface passivation quality and other dominant recombination processes.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zahidur R. Chowdhury, Zahidur R. Chowdhury, Alongkarn Chutinan, Alongkarn Chutinan, Adel B. Gougam, Adel B. Gougam, Nazir P. Kherani, Nazir P. Kherani, Stefan Zukotynski, Stefan Zukotynski, "Two-dimensional modeling of the back amorphous-crystalline silicon heterojunction (BACH) photovoltaic device", Proc. SPIE 7750, Photonics North 2010, 77502V (22 September 2010); doi: 10.1117/12.872942; https://doi.org/10.1117/12.872942


Hot-carrier solar cell NEGF-based simulations
Proceedings of SPIE (March 13 2016)
Effect of buffer layers on the performance of P3HT PCBM...
Proceedings of SPIE (November 16 2010)
Semiconductor nanowire photovoltaics
Proceedings of SPIE (September 10 2008)

Back to Top