Paper
17 May 2011 Phase-locking of commercial DFB lasers for distributed optical fiber sensing applications
Chris D. Rouse, Anthony W Brown, Michael T. V. Wylie, Bruce G. Colpitts
Author Affiliations +
Proceedings Volume 7753, 21st International Conference on Optical Fiber Sensors; 77532L (2011) https://doi.org/10.1117/12.885109
Event: 21st International Conference on Optical Fibre Sensors (OFS21), 2011, Ottawa, Canada
Abstract
The design of a phase/frequency detector-based optical phase-locked loop (PFD-OPLL) capable of locking two commercial semiconductor distributed feedback (DFB) lasers for the purpose of making Brillouin Optical Time-Domain Analysis (BOTDA) measurements is presented. Due to the aperiodic nature of the PFD transfer characteristic, the PFDOPLL offers strong acquisition performance without requiring additional acquisition hardware. Design constraints due to laser linewidths are relaxed by choosing a damping factor of 3.5 instead of 0.707. Loop stability is ensured by reducing the loop propagation delay by as much as possible in hardware, and choosing the loop natural frequency such that the loop bandwidth is below the FM phase reversal frequency of the laser. Results show stable lock performance at 11 GHz with a phase noise of -70dBc/Hz at a 100 Hz offset, a capture range of 2.5 GHz and a tuning range of 3.3 GHz. These specifications exceed the performance requirements of a BOTDA system.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chris D. Rouse, Anthony W Brown, Michael T. V. Wylie, and Bruce G. Colpitts "Phase-locking of commercial DFB lasers for distributed optical fiber sensing applications", Proc. SPIE 7753, 21st International Conference on Optical Fiber Sensors, 77532L (17 May 2011); https://doi.org/10.1117/12.885109
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Laser optics

Modulation

Optical sensing

Sensors

Fermium

Fiber lasers

Back to Top