11 September 2010 Three-dimensional polymer microdevices with gold nanorods
Author Affiliations +
Proceedings Volume 7757, Plasmonics: Metallic Nanostructures and Their Optical Properties VIII; 77573C (2010); doi: 10.1117/12.864099
Event: SPIE NanoScience + Engineering, 2010, San Diego, California, United States
Abstract
In this study, a three-dimensional (3D) polyacrylamide microstructure containing gold nanorods (AuNRs) was fabricated successfully by utilizing femtosecond laser-based two-photon polymerization (TPP) with a Rose Bengal (RB) photoinitiator, and can provide a great diversity of optical properties. To maintain AuNRs in the 3D polymer microstructures, the fabrication laser power can be significantly reduced to 1.0 mW by tuning the laser wavelength for the two-photon absorption of RB to improve TPP efficiency, but not for the longitudinal plasmon resonance of AuNRs to photothermally damage AuNRs. After the TPP processing, a higher laser power, greater than the threshold of the AuNR damage at the wavelength for the longitudinal plasmon resonance, is adopted to reshape the AuNRs into gold nanospheres. Then, the existence of the AuNRs in designated positions of the fabricated 3D microstructures can be achieved. The doped AuNRs with two-photon luminescence also act as contrast agent for internal diagnosis of 3D polymer microstructures.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
W.-S. Kuo, C.-H. Lien, K.-C. Cho, C.-Y. Chang, C.-Y. Lin, P. J. Campagnola, S.-J. Chen, "Three-dimensional polymer microdevices with gold nanorods", Proc. SPIE 7757, Plasmonics: Metallic Nanostructures and Their Optical Properties VIII, 77573C (11 September 2010); doi: 10.1117/12.864099; https://doi.org/10.1117/12.864099
PROCEEDINGS
8 PAGES


SHARE
KEYWORDS
3D microstructuring

Femtosecond phenomena

Plasmons

Polymers

Absorption

Gold

Bragg cells

Back to Top