Optical and noise performance of CMOS solid-state photomultipliers

Xiao Jie Chen; Erik B. Johnson; Christopher J. Staples; Eric Chapman; Guy Alberghini; James F. Christian

doi:10.1117/12.860494

17 August 2010 Optical and noise performance of CMOS solid-state photomultipliers

Xiao Jie Chen, Erik B. Johnson, Christopher J. Staples, Eric Chapman, Guy Alberghini, James F. Christian

Proceedings Volume 7781, Photonic Fiber and Crystal Devices: Advances in Materials and Innovations in Device Applications IV; 77810F (2010) https://doi.org/10.1117/12.860494
Event: SPIE Photonic Devices + Applications, 2010, San Diego, California, United States

Abstract

Solid-state photomultipliers (SSPM) are photodetectors composed of avalanche photodiode pixel arrays operating in Geiger mode (biased above diode breakdown voltage). They are built using CMOS technology and can be used in a variety of applications in high energy and nuclear physics, medical imaging and homeland security related areas. The high gain and low cost associated with the SSPM makes it an attractive alternative to existing photodetectors such as the photomultiplier tube (PMT). The capability of integrating CMOS on-chip readout circuitry on the same substrate as the SSPM also provides a compact and low-power-consumption solution to photodetector applications with stringent area and power requirements. The optical performance of the SSPM, specifically the detection and quantum efficiencies, can depend on the geometry and the doping profile associated with each photodiode pixel. The noise associated with the SSPM not only includes dark noise from each pixel, but also consists of excess noise terms due to after pulsing and inter-pixel cross talk. The magnitude of the excess noise terms can depend on biasing conditions, temperature, as well as pixel and inter-pixel dimensions. We present the optical and noise performance of SSPMs fabricated in a conventional CMOS process, and demonstrate the dependence of the SSPM performance on pixel/inter-pixel geometry, doping profile, temperature, as well as bias conditions. The continuing development of CMOS SSPM technology demonstrated here shows that low cost and high performance solid state photodetectors are viable solutions for many existing and future optical detection applications.

Citation Download Citation

Xiao Jie Chen, Erik B. Johnson, Christopher J. Staples, Eric Chapman, Guy Alberghini, and James F. Christian "Optical and noise performance of CMOS solid-state photomultipliers", Proc. SPIE 7781, Photonic Fiber and Crystal Devices: Advances in Materials and Innovations in Device Applications IV, 77810F (17 August 2010); https://doi.org/10.1117/12.860494

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available