Paper
27 August 2010 Improvement and optimal design of RGB LED backlight unit using a genetic algorithm
Yi-Hua Fan, Ying-Tsun Lee, Yi-Lin Liao, Chung-Chin Fu
Author Affiliations +
Abstract
To reduce the cost of LCD backlight unit (BLU) and raise efficiency, a direct LED BLU consisted of double-triangular structures was proposed to control the light from RGB side emitting LEDs. A genetic algorithm was used to search the optimal parameters of the shape of the double-triangular structures and the layout of the LEDs. A switch mode constant current control driver with a PWM controlled converter switch was used to maintaining the constant current output for the variable numbers of the LEDs in this paper. From the simulation results showed that without the diffuser, the brightness uniformity on the 25-point test was 93.44% for a 22" direct LED backlight unit with a thickness of 30mm with the optimized double-triangular structure. And the experiment result showed that the brightness uniformity and color uniformity were 85.61% and 0.021 for a small size test unit.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yi-Hua Fan, Ying-Tsun Lee, Yi-Lin Liao, and Chung-Chin Fu "Improvement and optimal design of RGB LED backlight unit using a genetic algorithm", Proc. SPIE 7787, Novel Optical Systems Design and Optimization XIII, 77870I (27 August 2010); https://doi.org/10.1117/12.860332
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

LED backlight

LCDs

RGB color model

Diffusers

Genetic algorithms

Blue light emitting diodes

RELATED CONTENT

LED collimation module for time sequential back light system
Proceedings of SPIE (September 25 2014)
Design of a novel LED lens cap and optimization of...
Proceedings of SPIE (April 21 2006)
A white-and-blue mixed LED backlight for airplane display
Proceedings of SPIE (November 24 2009)
LED backlight system with fiber optic red, green, blue to...
Proceedings of SPIE (October 04 2006)
High-efficiency trichromatic LED backlight for mobile LCDs
Proceedings of SPIE (February 22 2006)
A new design mixing RGB LED (red, green, blue light...
Proceedings of SPIE (September 12 2006)

Back to Top