7 September 2010 Deterministic sequential stray light analysis
Author Affiliations +
Non-sequential ray tracing for stray light analyses have demonstrated value, but are over-constrained when high sampling and speed are both needed. In cases where real geometry and mechanical surface properties are critical, such analyses are certainly required. But the goal of these analyses is often to attempt to approach the performance that would be achieved if only the optics contributed scatter and only through the sequential optical path. In other words, optical element scatter is the limiting case for system performance. An analysis technique is therefore presented that enables approximate but rapid sequential stray light estimates through deterministic modeling. Results of correlation to nonsequential analyses demonstrate the large range of applicability of this approach. Examples of parametric studies show the value of rapid paraxial estimates for understanding system performance sensitivities.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael G. Dittman, Michael G. Dittman, Eric Donley, Eric Donley, Frank Grochocki, Frank Grochocki, } "Deterministic sequential stray light analysis", Proc. SPIE 7794, Optical System Contamination: Effects, Measurements, and Control 2010, 77940T (7 September 2010); doi: 10.1117/12.860861; https://doi.org/10.1117/12.860861


General Contamination Criteria For Optical Surfaces
Proceedings of SPIE (February 18 1982)
Predicting Laser Port Scatter
Proceedings of SPIE (April 04 1989)
Methods for rapid evaluation of the stray light in optical...
Proceedings of SPIE (February 17 2004)
Limitations In A CODE-V To Apart Translator
Proceedings of SPIE (April 04 1989)
Stray Light Analysiswith Apart/Pade.Version 8.7
Proceedings of SPIE (June 02 1987)

Back to Top