1 September 2010 Developmental long trace profiler using optimally aligned mirror-based pentaprism
Author Affiliations +
Abstract
A low-budget surface slope measuring instrument, the Developmental Long Trace Profiler (DLTP), was recently brought into operation at the Advanced Light Source Optical Metrology Laboratory [Nucl. Instr. and Meth. A 616, 212- 223 (2010)]. The instrument is based on a precisely calibrated autocollimator and a movable pentaprism. The capability of the DLTP to achieve sub-microradian surface slope metrology has been verified via cross-comparison measurements with other high-performance slope measuring instruments when measuring the same high-quality test optics. In the present work, a further improvement of the DLTP is achieved by replacing the existing bulk pentaprism with a specially designed mirror based pentaprism. A mirror based pentaprism offers the possibility to eliminate systematic errors introduced by inhomogeneity of the optical material and fabrication imperfections of a bulk pentaprism. We provide the details of the mirror based pentaprism design and describe an original experimental procedure for precision mutual alignment of the mirrors. The algorithm of the alignment procedure and its efficiency are verified with rigorous ray tracing simulations. Results of measurements of a spherically curved test mirror and a flat test mirror using the original bulk pentaprism are compared with measurements using the new mirror based pentaprism, demonstrating the improved performance.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Samuel K. Barber, Samuel K. Barber, Gregory Y. Morrison, Gregory Y. Morrison, Valeriy V. Yashchuk, Valeriy V. Yashchuk, Mikhail V. Gubarev, Mikhail V. Gubarev, Ralf D. Geckeler, Ralf D. Geckeler, Jana Buchheim, Jana Buchheim, Frank Siewert, Frank Siewert, Thomas Zeschke, Thomas Zeschke, } "Developmental long trace profiler using optimally aligned mirror-based pentaprism", Proc. SPIE 7801, Advances in Metrology for X-Ray and EUV Optics III, 780103 (1 September 2010); doi: 10.1117/12.859925; https://doi.org/10.1117/12.859925
PROCEEDINGS
12 PAGES


SHARE
Back to Top