Translator Disclaimer
29 September 2010 Hartmann wavefront sensor and adaptive x-ray optics developments for synchrotron applications
Author Affiliations +
We report on the design and performances of a test prototype active X-ray mirror developed for the French national synchrotron radiation facility SOLEIL in collaboration with a French company ISP System. The active mirror uses 11 mechanical actuators: one actuator for the main curvature and 10 actuators along the mirror surface for correction of the residual shape errors. Its radius of curvature can be adjusted from infinity down to 50 m, with residual slope errors in correction less than 0.6 μrad RMS over a 300 mm useful length. A dedicated X-ray Hartmann wavefront sensor, based on YAG:Ce wavelength conversion to visible light, was developed for feedback control of the mirror. Closed-loop experiments were performed at 10 keV on the Metrology and Tests Beamline at SOLEIL.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pascal Mercère, Mourad Idir, Guillaume Dovillaire, Xavier Levecq, Samuel Bucourt, Lionnel Escolano, and Paul Sauvageot "Hartmann wavefront sensor and adaptive x-ray optics developments for synchrotron applications", Proc. SPIE 7803, Adaptive X-Ray Optics, 780302 (29 September 2010);


Control x-ray deformable mirrors with few measurements
Proceedings of SPIE (September 07 2016)
Evaluation of an ultra-high-precision x-ray optics
Proceedings of SPIE (October 10 2004)
Development of ultrahigh-precision x-ray optics
Proceedings of SPIE (December 23 2003)
New Design Of Mirror Bending Block
Proceedings of SPIE (May 02 1982)

Back to Top