Paper
24 September 2010 Inspection technique for nanoimprint template with mirror electron microscopy
Tomokazu Shimakura, Masaki Hasegawa, Hiroshi Suzuki, Hiroya Ohta
Author Affiliations +
Abstract
We examined the potential of using a mirror-electron-microscope (MEM), which has higher sensitivity than optical inspection tools and faster throughput than scanning electron microscopes (SEMs), as a master template inspection tool. We observed line/space patterns with half pitches of 50-100 nm and in which the width of only one space was slightly changed, using the MEM to verify the detection sensitivity of the dimension error. The MEM was able to detect dimension errors larger than 3 nm in the line/space patterns. From observation of the MEM images at various magnifications, we determined that the sensitivity of MEM did not depend exclusively on the resolution power of the image, and that MEM was sufficient for detecting the defects under the resolution power. If we assume that the field of view (FOV) of the MEM image was 30x30 square μm, and the acquisition time per image was 10 ms, the inspection time for the entire 2.5-inch surface of the master template was estimated to be about 10 hours. MEM is therefore a promising candidate for inspecting nanoimprint master templates due to its high sensitivity and acceptable throughput.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tomokazu Shimakura, Masaki Hasegawa, Hiroshi Suzuki, and Hiroya Ohta "Inspection technique for nanoimprint template with mirror electron microscopy", Proc. SPIE 7823, Photomask Technology 2010, 78230Q (24 September 2010); https://doi.org/10.1117/12.864090
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Microelectromechanical systems

Inspection

Mirrors

Image resolution

Nanoimprint lithography

Electron microscopes

Scanning electron microscopy

Back to Top