1 October 2010 A systematic study of source error in source mask optimization
Author Affiliations +
Abstract
Source Mask Optimization (SMO) technique is an advanced RET with the goal of extending optical lithography lifetime by enabling low k1 imaging [1,2]. Most of the literature concerning SMO has so far focused on PV (process variation) band, MEEF and PW (process window) aspects to judge the performance of the optimization as in traditional OPC [3]. In analogy to MEEF impact for low k1 imaging we investigate the source error impact as SMO sources can have rather complicated forms depending on the degree of freedom allowed during optimization. For this study we use Tachyon SMO tool on a 22nm metal design test case. A free form and parametric source solutions are obtained using MEEF and PW requirements as main criteria. For each type of source, a source perturbation is introduced to study the impact on lithography performance. Based on the findings we conclude on the choice of freeform or parametric as a source and the importance of source error in the optimization process.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. Alleaume, C. Alleaume, E. Yesilada, E. Yesilada, V. Farys, V. Farys, L. Depre, L. Depre, V. Arnoux, V. Arnoux, Zhipan Li, Zhipan Li, Y. Trouiller, Y. Trouiller, A. Serebriakov, A. Serebriakov, } "A systematic study of source error in source mask optimization", Proc. SPIE 7823, Photomask Technology 2010, 782312 (1 October 2010); doi: 10.1117/12.864246; https://doi.org/10.1117/12.864246
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

RET selection on state-of-the-art NAND flash
Proceedings of SPIE (March 18 2015)
Full-flow RET creation, comparison, and selection
Proceedings of SPIE (October 29 2014)
Layer aware source mask target optimization
Proceedings of SPIE (March 15 2016)
A novel full chip process window OPC based on matrix...
Proceedings of SPIE (March 15 2016)

Back to Top