Paper
29 September 2010 Study of EUV mask inspection technique using DUV light source for hp22nm and beyond
Author Affiliations +
Abstract
EUV lithography is expected to be not only for hp 2Xnm node device production method but also for hp 1X nm node. We have already developed the mask inspection system using 199nm wavelength with simultaneous transmitted and reflected illumination optics, which utilize p-polarized and s-polarized illumination for high defect detection sensitivity, and we developed a new image contrast enhancement method which changes the digitizing rate of imaging sensor depending on the signal level. Also, we evaluate the mask structure which improve the image contrast and defect detection sensitivity. EUVL-mask has different configuration from transmitted type optical-mask. A captured image simulator has been developed to study the polarized illumination performance theoretically of our inspection system. Preferable mask structure for defect detection and possibility of miss defect detection are considered.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ryoichi Hirano, Nobutaka Kikuiri, Hideaki Hashimoto, Kenichi Takahara, Masatoshi Hirono, and Hiroyuki Shigemura "Study of EUV mask inspection technique using DUV light source for hp22nm and beyond", Proc. SPIE 7823, Photomask Technology 2010, 782339 (29 September 2010); https://doi.org/10.1117/12.866673
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Inspection

Photomasks

Defect detection

Extreme ultraviolet

Extreme ultraviolet lithography

Image contrast enhancement

Image enhancement

Back to Top