Paper
17 November 2010 Measurement of inner surface profile of a tube using two wavelength phase-shifting digital holography
Masayuki Yokota, Toru Adachi, Yusuke Sakamoto
Author Affiliations +
Abstract
A digital holographic method for evaluation of an inner surface profile of tubes is proposed. For surface contouring, two wavelength method using an injection-current induced wavelength change of a laser diode is used. To obtain the inner surface profile, a cone-shaped mirror is inserted into the tube. Distribution of an optical path length in the experimental alignment is calculated and utilized to compensate for a distortion occurring in the experimental profile of the surface due to a deviation of a mirror position. The shape of two seals pasted on the inner surface can be evaluated by the method with a digital image processing. It is shown that the proposed method can visualize and detect three dimensional shape of defects on the inner surface of tubes.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Masayuki Yokota, Toru Adachi, and Yusuke Sakamoto "Measurement of inner surface profile of a tube using two wavelength phase-shifting digital holography", Proc. SPIE 7848, Holography, Diffractive Optics, and Applications IV, 78481A (17 November 2010); https://doi.org/10.1117/12.868902
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Digital holography

Charge-coupled devices

Distortion

Phase shifts

Aluminum

Holography

Back to Top