Paper
15 November 2010 Free-form lens design for LED indoor illumination
Kuang-Lung Huang, Jin-Jia Chen, Te-Yuan Wang, Li-Lin Huang
Author Affiliations +
Abstract
This paper presents a free-form lens design for indoor illumination. The lens consists of a TIR (total internal reflection) surface on the sidewall, a refractive surface on the front side, and a concave surface on the rear side. The TIR surface is decorated with a free-form profile that light rays emitted from the LED with a larger spread angle to the axis will experience a total internal refection and output from the front refractive surface. While the central part of the front refractive surface has a convex surface that makes light rays closing to the optical axis more evenly distributed. The purpose of the rear concave surface is to let light rays emitted from the LED enter the lens straightforwardly. With this lens light rays from a Lambertian-type LED light source can be redistributed so that a uniform illumination can be achieved. The optical simulation results show that the measured optical efficiency is 75% while the uniformity is 80% on a target plane of 6-m diameter and at 2.5-m away.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kuang-Lung Huang, Jin-Jia Chen, Te-Yuan Wang, and Li-Lin Huang "Free-form lens design for LED indoor illumination", Proc. SPIE 7852, LED and Display Technologies, 78521D (15 November 2010); https://doi.org/10.1117/12.870647
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Reflection

Light sources

Refraction

Lens design

Light

LED lighting

RELATED CONTENT


Back to Top