9 November 2010 Study on self-loading F-P fiber sensor micro-machined with 157-nm excimer laser
Author Affiliations +
Abstract
Two kinds of self-loading Farby-Perot (F-P) fiber sensors were prepared by creating micro-grooves on side-face of single mode fiber-28 (SMF-28) and photonic crystal fiber (PCF) with 157 nm excimer laser. Self-loading F-P interference fringe shifts were measured under different temperature, stress and alcohol solution. Temperature sensing experiments show that the sensitivity of PCF and SMF F-P sensors are 0.0580nm/°C and 0.0535nm/°C when the temperature ranges from 30 °C to100 °C. The interference fringe shifts of PCF and SMF F-P sensors are 1.6 nm and 2.2 nm when they were loaded with 80 μm elongation along fiber axis, which correspond to stress sensitivity of 1.41pm/με and 1.50pm/με respectively. The interference fringe shifts of the SMF F-P sensor and the all-solid PCF sensor are 0.4775nm and 0.3490nm when the quality percentage of alcohol changes from 0 to 99.99%.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kai Gu, Kai Gu, Jixiang Dai, Jixiang Dai, Feng Tu, Feng Tu, Minghong Yang, Minghong Yang, } "Study on self-loading F-P fiber sensor micro-machined with 157-nm excimer laser", Proc. SPIE 7853, Advanced Sensor Systems and Applications IV, 78530K (9 November 2010); doi: 10.1117/12.870135; https://doi.org/10.1117/12.870135
PROCEEDINGS
7 PAGES


SHARE
Back to Top