Paper
9 November 2010 Optical fiber humidity sensor with PVDF thin film as sensitive element
Xiaobing Li, Minghong Yang, Jixiang Dai, Hongliang Liu, Dan Yin, Lijie Dong
Author Affiliations +
Abstract
A novel optical fiber humidity sensor using polyvinylidene fluoride (PVDF) as sensitive material was proposed in this paper. Three-layer coating was deposited on the end-face of optical fiber, which constructs an extrinsic Fabry-Perot (F-P) interference structure. Ag layer deposited by DC magnetron sputtering was used as mirror layer in the F-P interference structure. PVDF layer was realized with Czochralski method as F-P cavity. Simulation was performed using data fitting to analysis the relevant parameters on sensor performance. Experimental result shows the interference fringe shifts to longer wavelength when relative humidity increases. The fringe shifted 2.4nm with a good linearity response when relative humidity increases from 11% to 97%. The linearity of interference fringe shift to relative humidity was 0.98415, the response time was less than 1min.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaobing Li, Minghong Yang, Jixiang Dai, Hongliang Liu, Dan Yin, and Lijie Dong "Optical fiber humidity sensor with PVDF thin film as sensitive element", Proc. SPIE 7853, Advanced Sensor Systems and Applications IV, 78533T (9 November 2010); https://doi.org/10.1117/12.871725
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Humidity

Sensors

Ferroelectric polymers

Optical fibers

Head

Silver

Coating

Back to Top