21 February 2011 Next generation 8xx nm laser bars and single emitters
Author Affiliations +
Semiconductor lasers with emission in the range 790 - 880 nm are in use for a variety of application resulting in different laser designs to fulfill requirements in output power, operation temperature and lifetimes. The output power is limited by self heating and catastrophic optical mirror damage at the laser facet (COMD). Now we present data on bars fabricated with our new facet technology, which enables us to double the maximum facet load. We present q-cw laser bar with 80% fill factor with increased power level to 350W in long term operation at 200μs and 100Hz. The COMD limit of the bar is as high as 680W. Using Quantel's optimized packaging stacks with 11 bars of 5mm widths are tested at up to 120A resulting over 66% power conversion efficiency at 1600W output power. Laser bars for continuous wave operation like 50% fill factor bars had an COMD limit of approx. 250W with conventional facet technology, the value is equivalent to 10W per 200μm emitter (conditions: 200μs). The new facet technology pushes the facet stability to 24W/emitter. The new process and an improved design enable us to shift continuous wave operation at 808nm from 100W to 150W/bar with lifetimes of several thousand hours at 30°C using DILAS mounting technology. Higher power is possible depending on lifetime requirements. The power conversion efficiency of the improved devices is as high as 62% at 200W cw. The next limitation of 8xxnm lasers is high temperature operation: Values of 60-80°C are common for consumer applications of single emitters. Therefore Osram developed a new epitaxial design which reduced the generation of bulk defects. The corresponding Osram single emitters operate at junction temperatures up to 95°C, a value which corresponds to 80°C heat sink temperature for lasers soldered on C-mount or 65°C case temperature for lasers mounted in TO can. Current densities of the single emitter broad area lasers are as high as 1.4kA/cm2 at 850nm emission wavelength.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Uwe Strauss, Uwe Strauss, Martin Müller, Martin Müller, Tomasz Swietlik, Tomasz Swietlik, Robin Fehse, Robin Fehse, Christian Lauer, Christian Lauer, Günther Grönninger, Günther Grönninger, Harald König, Harald König, Markus Keidler, Markus Keidler, Thierry Fillardet, Thierry Fillardet, Andreas Kohl, Andreas Kohl, Michael Stoiber, Michael Stoiber, Iris Scholl, Iris Scholl, Jens Biesenbach, Jens Biesenbach, Martina Baeumler, Martina Baeumler, Helmer Konstanzer, Helmer Konstanzer, } "Next generation 8xx nm laser bars and single emitters", Proc. SPIE 7918, High-Power Diode Laser Technology and Applications IX, 79180T (21 February 2011); doi: 10.1117/12.874818; https://doi.org/10.1117/12.874818


High power diode lasers emitting from 639 nm to 690...
Proceedings of SPIE (March 06 2014)
Air-cooled 10 W pulsed argon laser
Proceedings of SPIE (April 11 2007)
Recent Advances In High Power Semiconductor Lasers
Proceedings of SPIE (June 21 1989)
The study on the high power LD pumped Nd YAG...
Proceedings of SPIE (June 09 2006)
Highly reliable qcw laser bars and stacks
Proceedings of SPIE (February 12 2008)

Back to Top