26 March 2011 Modeling the transfer of line edge roughness from an EUV mask to the wafer
Author Affiliations +
Abstract
Contributions to line edge roughness (LER) from extreme ultraviolet (EUV) masks have recently been shown to be an issue of concern for both the accuracy of current resist evaluation tests as well the ultimate LER requirements for the 22 nm production node. More recently, it has been shown that the power spectral density of the mask-induced roughness is markedly different than that of intrinsic resist roughness and thus potentially serves as a mechanism for distinguishing mask effects from resist effects in experimental results. But the evaluation of stochastic effects in the resist itself demonstrate that such a test would only be viable in cases where the resist effects are completely negligible in terms of their contribution to the total LER compared to the mask effects. Also the results presented here lead us to the surprising conclusion that it is indeed possible for mask contributors to be the dominant source of LER while the spatial characteristics of the LER remain indistinguishable from the fractal characteristics of resist-induced LER.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gregg M. Gallatin, Gregg M. Gallatin, Patrick P. Naulleau, Patrick P. Naulleau, "Modeling the transfer of line edge roughness from an EUV mask to the wafer", Proc. SPIE 7969, Extreme Ultraviolet (EUV) Lithography II, 796903 (26 March 2011); doi: 10.1117/12.881641; https://doi.org/10.1117/12.881641
PROCEEDINGS
10 PAGES


SHARE
RELATED CONTENT


Back to Top