15 April 2011 Analysis of resist patterns for material and process design: parameter extraction from dose pitch matrices of line-width and edge roughness and cross-sectional SEM images
Author Affiliations +
Abstract
The chemical reactions induced in chemically amplified resists using a molecular glass resist (the seventh Selete Standard Resist, SSR7) were investigated. Two-dimensional (half-pitch and exposure dose) matrices of resist line width and line edge roughness (LER) and the remaining resist thickness were analyzed on the basis of the sensitization mechanisms of chemically amplified resists for extreme ultraviolet (EUV) lithography. The line width, LER, and remaining resist thickness were successfully reproduced by assuming that LER is inversely proportional to the chemical gradient. The chemistry of SSR7 was discussed.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Takahiro Kozawa, Takahiro Kozawa, Hiroaki Oizumi, Hiroaki Oizumi, Toshiro Itani, Toshiro Itani, Seiichi Tagawa, Seiichi Tagawa, } "Analysis of resist patterns for material and process design: parameter extraction from dose pitch matrices of line-width and edge roughness and cross-sectional SEM images", Proc. SPIE 7972, Advances in Resist Materials and Processing Technology XXVIII, 79720U (15 April 2011); doi: 10.1117/12.879331; https://doi.org/10.1117/12.879331
PROCEEDINGS
7 PAGES


SHARE
Back to Top