Characterization and control of dynamic lens heating effects under high volume manufacturing conditions

J. Bekaert; L. Van Look; G. Vandenberghe; P. van Adrichem; M. J. Maslow; J.-W. Gemmink; H. Cao; S. Hunsche; J. T. Neumann; A. Wolf

doi:10.1117/12.881609

22 March 2011 Characterization and control of dynamic lens heating effects under high volume manufacturing conditions

J. Bekaert, L. Van Look, G. Vandenberghe, P. van Adrichem, M. J. Maslow, J.-W. Gemmink, H. Cao, S. Hunsche, J. T. Neumann, A. Wolf

Author Affiliations +

Proceedings Volume 7973, Optical Microlithography XXIV; 79730V (2011) https://doi.org/10.1117/12.881609
Event: SPIE Advanced Lithography, 2011, San Jose, California, United States

Abstract

The desire to reduce cost in volume manufacturing has driven up the throughput in the lithographic exposure machines. As a result the power transmitted in the projection optics increases. Although small, the absorption levels in the lens materials are not zero, which leads to localized heating of the lens and hence lens aberrations. To squeeze out the maximum process windows, the pupil shapes have transformed from simple annular shapes to shapes with very concentrated poles. As a result, the exposure energy transported through the lens is no longer equally distributed over the lenses of the projection options. Instead only a fraction of the lens gets to transport the total power. This concentration of power further aggravates the lens heating induced aberrations and enhances the importance of advanced lens heating control schemes which are available on ASML scanners. To analyze the effects of lens heating on the final imaging, a model was developed by the lens manufacturer Carl Zeiss SMT GmbH, and incorporated into a litho simulation environment by ASML BRION. This tool can be used to analyze the impact of dose/throughput, illumination shapes and reticle layout on aberrations. It provides a means to assess potential lens heating issues even before production masks are manufactured. Moreover, this computational tool opens the possibility to calculate parameters for lens heating correction, rather than measuring them, saving valuable machine time. In this paper, the performance of the novel computational lens heating control is demonstrated on wafer and compared with the traditional way of measuring the relevant parameters. In addition, a modeling study is performed to assess possible lens heating effects for freeform or non-traditional source shapes, thereby demonstrating the advanced correction potential of ASML latest aberration manipulator, called FlexWave^TM.

Citation Download Citation

J. Bekaert, L. Van Look, G. Vandenberghe, P. van Adrichem, M. J. Maslow, J.-W. Gemmink, H. Cao, S. Hunsche, J. T. Neumann, and A. Wolf "Characterization and control of dynamic lens heating effects under high volume manufacturing conditions", Proc. SPIE 7973, Optical Microlithography XXIV, 79730V (22 March 2011); https://doi.org/10.1117/12.881609

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE