Translator Disclaimer
4 April 2011 Single exposure contacts are dead. Long live single exposure contacts!
Author Affiliations +
Abstract
The paper describes a process/design co-optimization effort based on an SRAM design to enable a single exposure contact process for the 28nm technology half node. As a start, a change to the wiring concept of the standard SRAM design was implemented. The resulting individual contact layer elements may seem even more resolution critical to the casual observer. But in reality, the flexibility for source-mask optimization had been significantly improved. In a second step, wafer targets and mask dimension options (using various kinds of OPC methods and SRAF strategies) were run through several optimization iterations. This included interlevel considerations due to stringent overlap requirements. Several promising SRAM design as well as mask options were identified and experimentally verified to finally converge to an optimum mask and wafer target layout. Said optimum solution still supports an automated OPC approach using standard EDA tools and off the shelf OPC strategies. In a last step, a 1Mbit electrically testable SRAM was designed and manufactured together with alternative SRAM designs and process options. After explaining the changes to the wiring of the SRAM design, the paper discusses in great detail various mask optimization solutions and their consequences on wafer target and printability. Simulation and experimental results are compared and the concluding optimized solution is explained. Furthermore, some key lithography and etch process elements that became the single exposure process enabler are explained in more detail. Finally, the paper will take a look at electrical results of the 1Mbit electrically testable SRAM as the ultimate proof of concept.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Henning Haffner, Martin Ostermayr, Hideki Kanai, Chan Sam Chang, Bradley Morgenfeld, Jujin An, Meng Luo, and Haoren Zhuang "Single exposure contacts are dead. Long live single exposure contacts!", Proc. SPIE 7974, Design for Manufacturability through Design-Process Integration V, 79740E (4 April 2011); https://doi.org/10.1117/12.879681
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT


Back to Top