28 March 2011 Dielectric elastomer actuators with enhanced permittivity and strain
Author Affiliations +
Abstract
The impact of the modification of silicone rubber with barium titanate particles on the permittivity and hence on the performance of dielectric elastomer actuators has been investigated. Barium titanate powders with different particle sizes in the micrometer and nanometer range were used in this study. The mechanical properties of the composite materials in terms of the Young's modulus in tension and compression load as well as the viscoelastic behavior in shear load were experimentally determined. Additionally, the electric properties like permittivity, specific conductivity and electric breakdown field strength were evaluated. Model film actuators with the modified silicone material were prepared and their actuation strain was measured. With a concentration of 20 vol.% barium titanate particles, an enhancement of the permittivity of 140 % and an increase of the actuation strain of about 100 % with respect to the unmodified material could be achieved. Furthermore, first multilayer actuators were manufactured with an automatic spin coating process and their permittivity and strain were measured. The results of these investigations are in good agreement with the data of the experiments with single layer dielectric elastomer films.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Holger Böse, Holger Böse, Detlev Uhl, Detlev Uhl, Klaus Flittner, Klaus Flittner, Helmut Schlaak, Helmut Schlaak, } "Dielectric elastomer actuators with enhanced permittivity and strain", Proc. SPIE 7976, Electroactive Polymer Actuators and Devices (EAPAD) 2011, 79762J (28 March 2011); doi: 10.1117/12.879808; https://doi.org/10.1117/12.879808
PROCEEDINGS
13 PAGES


SHARE
Back to Top