27 April 2011 Improving an energy harvesting device for railroad safety applications
Author Affiliations +
Due to hundreds of fatalities annually at unprotected railroad crossings (mostly because of collisions with passenger vehicles and derailments resulting from improperly maintained tracks and mechanical failures), supplying a reliable source of electrical energy to power crossing lights and distributed sensor networks is essential to improve safety. With regard to the high cost of electrical infrastructure for railroad crossings in remote areas and the lack of reliability and robustness of solar and wind energy solutions, development of alternative energy harvesting devices is of interest. In this paper, improvements to a mechanical energy harvesting device are presented. The device scavenges electrical energy from deflection of railroad track due to passing railcar traffic. It is mounted to and spans two rail ties and converts and magnifies the track's entire upward and downward displacement into rotational motion of a PMDC generator. The major improvements to the new prototype include: harvesting power from upward displacement in addition to downward, changing the gearing and generator in order to maximize power production capacity for the same shaft speed, and improving the way the system is stabilized for minimizing lost motion. The improved prototype was built, and simulations and tests were conducted to quantify the effects of the improvements.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Abolfazl Pourghodrat, Abolfazl Pourghodrat, Carl A. Nelson, Carl A. Nelson, Kyle J. Phillips, Kyle J. Phillips, Mahmood Fateh, Mahmood Fateh, } "Improving an energy harvesting device for railroad safety applications", Proc. SPIE 7977, Active and Passive Smart Structures and Integrated Systems 2011, 79770U (27 April 2011); doi: 10.1117/12.880631; https://doi.org/10.1117/12.880631


Flat inductors for human motion energy harvesting
Proceedings of SPIE (May 16 2013)
Perpetual harvesting device electronics
Proceedings of SPIE (May 17 2011)
Small-scale modular wind turbine
Proceedings of SPIE (April 12 2010)
Improved pen harvester for powering a pulse rate sensor
Proceedings of SPIE (March 27 2012)

Back to Top