Feasibility of using line scanning thermography in NDE of wind turbine blades

Obdulia Ley; Valery Godinez

doi:10.1117/12.880095

19 April 2011 Feasibility of using line scanning thermography in NDE of wind turbine blades

Obdulia Ley, Valery Godinez

Proceedings Volume 7983, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2011; 79831W (2011) https://doi.org/10.1117/12.880095
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2011, San Diego, California, United States

Abstract

Today, the increasing energy demand and the need for clean power generation has lead to the improvement of wind turbines and the development non invasive inspection techniques for the assessment of wind turbine blades to maintain long term reliability as well as to avoid catastrophic failures. Given the complexity of the geometry, the material composition and material thicknesses, finding a NDT technique to effectively and rapidly inspect the blades is a challenging task. Wind turbine blades are fabricated using different materials like fiber glass, carbon composites, foam and/ or balsa wood. Layers of these materials are bonded together using an epoxy type resin. Inspection of the bond quality between external layers and structural elements of the blade is of fundamental importance for quality control and service of the blade. In this study our efforts towards the applications of Line Scanning Thermography (LST) for the analysis of test coupons fabricated using the materials employed in the manufacture of wind turbine blades, as well as some wind turbine blade sections. LST utilizes a line heat source to thermally excite the surface to be inspected and an infrared detector to record the transient surface temperature variation produced by disbonds, and other subsurface imperfections. The LST technique has provided a quick and efficient methodology to scan large composite structures, which makes it desirable for the inspection of wind turbine blades. The scanning protocols developed for the detection of sub-surface disbonds (delamination) in coupons and parts will be presented. The successes and limitations of the technique will be discussed.

Citation Download Citation

Obdulia Ley and Valery Godinez "Feasibility of using line scanning thermography in NDE of wind turbine blades", Proc. SPIE 7983, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2011, 79831W (19 April 2011); https://doi.org/10.1117/12.880095

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available