31 March 2011 Hierarchical fiber-optic-based sensing system for impact damage monitoring of large-scale CFRP structures
Author Affiliations +
Abstract
This study proposes a novel hierarchical sensing system for detecting impact damage in composite structures. In the hierarchical system, numerous three-dimensionally structured sensor devices are distributed throughout the whole structural area and connected with an optical fiber network through transducing mechanisms. The distributed devices detect damage, and the fiber optic network gathers the damage signals and transmits the information to a measuring instrument. This study began by discussing the basic concept of the hierarchical sensing system through comparison with existing fiber-optic-based systems and the impact damage detection system for the composite structure was then proposed. The sensor devices were developed based on Comparative Vacuum Monitoring (CVM) system and Brillouin based distributed strain sensing was utilized to gather the damage signals from the distributed devices. Finally a verification test was conducted using a carbon fiber reinforced plastic (CFRP) fuselage demonstrator. Occurrence of barely visible impact damage was successfully detected and it was clearly indicated that the hierarchical system has better repairability, higher robustness, and wider monitorable area compared to existing systems.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shu Minakuchi, Shu Minakuchi, Nobuo Takeda, Nobuo Takeda, Haruka Tsukamoto, Haruka Tsukamoto, Hidehiko Banshoya, Hidehiko Banshoya, } "Hierarchical fiber-optic-based sensing system for impact damage monitoring of large-scale CFRP structures", Proc. SPIE 7984, Health Monitoring of Structural and Biological Systems 2011, 798427 (31 March 2011); doi: 10.1117/12.880669; https://doi.org/10.1117/12.880669
PROCEEDINGS
6 PAGES


SHARE
Back to Top