You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
19 January 2011CD and PMD monitoring based on RF spectrum analysis with
Chromatic dispersion (CD) and polarization-mode dispersion (PMD) monitoring methods based on radio-frequency (RF)
spectrum analysis and optical filtering are demonstrated. By using a narrow band fiber Bragg grating (FBG) notch filter,
which is centered at 10GHz away from carrier, 10GHz RF power can be used as a CD-insensitive PMD monitoring
signal. By taking the 10GHz RF power ratio of non-filtered and filtered signal, PMD-insensitive CD monitoring can be
achieved. If the FBG notch filter is placed at optical carrier, the RF clock power ratio between non-filtered and filtered
signal is also a PMD-insensitive CD monitoring parameter, which has larger RF power dynamic range and better
measurement resolution. Both simulation and experiment results show that the proposed methods are efficient on
measuring CD and PMD values in 38-Gbit/s DQPSK and 57-Gbit/s D8PSK systems.
The alert did not successfully save. Please try again later.
Changyuan Yu, Jing Yang, "CD and PMD monitoring based on RF spectrum analysis with optical filtering," Proc. SPIE 7986, Passive Components and Fiber-Based Devices VII, 798604 (19 January 2011); https://doi.org/10.1117/12.888982