28 February 2011 Pulsed laser-induced forming of thin sheet metal
Author Affiliations +
Proceedings Volume 7996, Fundamentals of Laser-Assisted Micro- and Nanotechnologies 2010; 799609 (2011); doi: 10.1117/12.889133
Event: Fundamentals of Laser Assisted Micro- and Nanotechnologies 2010, 2010, St. Petersburg, Russian Federation
Abstract
The experimental study regarding the laser bending of sheet metal parts of various shapes at different irradiation conditions is reported. The present work is carried out using Nd: YAG laser (average power of 200 W, pulse duration of 0.1 - 10 ms). Plates made of alloyed steel of various grades and having thickness from 0.3 to 1.1 mm were used as samples. Formation of laser beam path on the odd-shaped parts was executed by the programmable 6-axis robot Motoman SSF-2000.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. A. Petrov, A. D. Kochetov, "Pulsed laser-induced forming of thin sheet metal", Proc. SPIE 7996, Fundamentals of Laser-Assisted Micro- and Nanotechnologies 2010, 799609 (28 February 2011); doi: 10.1117/12.889133; https://doi.org/10.1117/12.889133
PROCEEDINGS
5 PAGES


SHARE
KEYWORDS
Pulsed laser operation

Metals

Laser applications

Laser irradiation

Actuators

Neodymium

Optical testing

Back to Top