Study on relationship between the roughness and the surface function in grinding

Haolin Li; Xingjuan Ying

doi:10.1117/12.888648

Translator Disclaimer

24 May 2011 Study on relationship between the roughness and the surface function in grinding

Haolin Li; Xingjuan Ying

Author Affiliations +

Proceedings Volume 7997, Fourth International Seminar on Modern Cutting and Measurement Engineering; 79970F (2011) https://doi.org/10.1117/12.888648
Event: Fourth International Seminar on Modern Cutting and Measuring Engineering, 2010, Beijing, China

Abstract

Surface roughness is a widely used index of product quality and in most cases a technical requirement for mechanical products. Achieving the desired surface quality is of importance for the functional behavior of a part. This paper is aimed at providing current knowledge on the association of surface roughness with function in grinding. Main roughness parameters, adopted by ISO standards or not, are described. The correlation between surface roughness and the desirable function of the surface are discussed. A model is established for describing the generation of the 'ideal' ground surface profile to predict theoretically the work piece roughness. But the model is found to be of limited practical use. It is necessary to adjust the empirical values to the analytical expression obtained in 'ideal' model.

Citation Download Citation

Haolin Li and Xingjuan Ying "Study on relationship between the roughness and the surface function in grinding", Proc. SPIE 7997, Fourth International Seminar on Modern Cutting and Measurement Engineering, 79970F (24 May 2011); https://doi.org/10.1117/12.888648

PROCEEDINGS
6 PAGES

DOWNLOAD PDF SAVE TO MY LIBRARY

SHARE

GET CITATION

< Previous Article

|

Next Article >

Subscribe to Digital Library

Receive Erratum Email Alert

Keywords/Phrases

Search In:

Publication Years