24 May 2011 Effects of technological parameters on microstructure and properties of CrAlN coating deposited by DC magnetron sputtering
Author Affiliations +
Proceedings Volume 7997, Fourth International Seminar on Modern Cutting and Measurement Engineering; 79970M (2011) https://doi.org/10.1117/12.888040
Event: Fourth International Seminar on Modern Cutting and Measuring Engineering, 2010, Beijing, China
Abstract
In this paper, the deposition processes of CrAlN coatings on high speed steel (M2) substrate was mainly researched, which made by reactive direct current (DC) magnetron sputtering with AlCr alloy target. The effects of technological parameters (Ar/N2 flow ratio, gas pressure and substrate temperature) on the microstructure and properties of CrAlN coatings were systematically studied with scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectrum (EDS) and nano-indentation techniques. The results indicated that Ar/N2 flow rate, gas pressure and substrate temperature greatly influenced the microstructure and properties of CrAlN coatings. With Ar/N2 flow ratio of 1, gas pressure of 0.2Pa and substrate temperature of 300°C, the hardness and elastic modulus of CrAlN coating were 34.8GPa and 434.3GPa respectively.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lihong Yang, Lihong Yang, Kangpei Zheng, Kangpei Zheng, Ping Liu, Ping Liu, Wei Li, Wei Li, } "Effects of technological parameters on microstructure and properties of CrAlN coating deposited by DC magnetron sputtering", Proc. SPIE 7997, Fourth International Seminar on Modern Cutting and Measurement Engineering, 79970M (24 May 2011); doi: 10.1117/12.888040; https://doi.org/10.1117/12.888040
PROCEEDINGS
8 PAGES


SHARE
Back to Top