24 May 2011 Effect of VC/TaC on W-Ti-Co ultrafine cemented carbides
Author Affiliations +
Proceedings Volume 7997, Fourth International Seminar on Modern Cutting and Measurement Engineering; 79970O (2011) https://doi.org/10.1117/12.888414
Event: Fourth International Seminar on Modern Cutting and Measuring Engineering, 2010, Beijing, China
Abstract
The ultrafine WC-14wt%TiC-8wt%Co (YT14) powders doped different vanadium carbide and tantalum carbide (VC/TaC) content with an average particle size of 270nm were prepared by 72 hours high-energy ball milling. The VC/TaC content was 0%, (0.3VC+0.5TaC) wt%, (0.4VC+0.4TaC) wt%, (0.5VC+0.3TaC) wt% respectively. VC/TaC had disadvantage influence on cubage contraction and density of YT14, but promoted transverse rupture strength (TRS) and refined grain size. When the VC/TaC content was (0.4VC+0.4TaC) wt%, combination property of alloy was best, the density was 11.26 g·cm-3, the hardness was 92.6HRA, the TRS was 1520MPa, the average grain size was 0.6μm.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chongcai Zhang, Chongcai Zhang, Feiou Wu, Feiou Wu, Bo Zeng, Bo Zeng, Zhiyong Sheng, Zhiyong Sheng, Daocheng Luan, Daocheng Luan, } "Effect of VC/TaC on W-Ti-Co ultrafine cemented carbides", Proc. SPIE 7997, Fourth International Seminar on Modern Cutting and Measurement Engineering, 79970O (24 May 2011); doi: 10.1117/12.888414; https://doi.org/10.1117/12.888414
PROCEEDINGS
8 PAGES


SHARE
Back to Top