24 May 2011 Effect of VC on W-Ti-Co ultrafine cemented carbides
Author Affiliations +
Proceedings Volume 7997, Fourth International Seminar on Modern Cutting and Measurement Engineering; 79970P (2011) https://doi.org/10.1117/12.888419
Event: Fourth International Seminar on Modern Cutting and Measuring Engineering, 2010, Beijing, China
Abstract
The ultrafine WC-14wt%TiC-8wt%Co powders doped different vanadium carbide(VC) content with an average particle size of 270nm were prepared by 72 hours high-energy ball milling. The VC content ranged from 0wt% to 1wt%. The powder was cold isostatic pressed at 280MPa and vacuum sintered at 1380°C. The physical properties and the micrographs of samples were detected. The main conclusions were as follow: the coercivity and hardness increased and the density and Cobalt magnetic decreased with the content of VC increasing; the hardness of alloy with 0.8wt% VC reached 91.8HRA.When the content of VC was less than 0.6wt%, the transverse rupture strength (TRS) increased; the content surpassed 0.8wt%, the TRS was lower than the one without VC. The VC could inhibited the growth of WC grain and the average grain size of WC with 0.8wt% VC was 0.7μm.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chongcai Zhang, Chongcai Zhang, Bo Zeng, Bo Zeng, Feiou Wu, Feiou Wu, Zhiyong Sheng, Zhiyong Sheng, Daocheng Luan, Daocheng Luan, } "Effect of VC on W-Ti-Co ultrafine cemented carbides", Proc. SPIE 7997, Fourth International Seminar on Modern Cutting and Measurement Engineering, 79970P (24 May 2011); doi: 10.1117/12.888419; https://doi.org/10.1117/12.888419
PROCEEDINGS
8 PAGES


SHARE
Back to Top